Measure
Information about measuring
If you have SIRIUS HS and some other devices with a lower maximum sample rate connected and you can't set the sample rate higher then 200kHz on the HS d...
Tue, 18 Feb, 2020 at 8:46 AM
It is possible to use three single counter signals with only one counter connector. You can connect each counter to a separate "IN" pin and to the...
Fri, 19 Apr, 2019 at 3:56 PM
Here you can see the schematics for typical DO applications with Krypton DO:
Thu, 8 Aug, 2019 at 9:19 AM
Channel remapping is a useful feature, because it solves a problem that engineers often face, therefore saving a lot of time. In this example we will create...
Mon, 8 Sep, 2025 at 1:06 PM
In DewesoftX user can choose between three screen-sharing technologies for remote desktop connection to slave measurement units in a Dewesoft NET system: Wi...
Tue, 4 Jan, 2022 at 1:27 PM
ACCv1: - hardware 1 Hz (-3dB) 1st order HP filter + Software 0,1Hz (-3dB) 2nd order Butterworth HP filter - hardware 1 Hz (-3dB) 1st order HP filter + S...
Mon, 13 Jan, 2020 at 10:38 AM
Explained below are the different functionalities that can be used on SIRIUSe device. It is important to pay special attention to the function generator mod...
Tue, 10 Mar, 2020 at 1:44 PM
You can adjust the synchronization time source for the system in the Device Settings. The clock provider can be a Dewesoft DAQ device (the device generates ...
Mon, 17 Jan, 2022 at 12:36 PM
Did you know that your Windows operating system can be used as a Clock provider for NTP? Here is a guideline for setup. Instructions are valid for the f...
Fri, 12 Mar, 2021 at 9:13 AM