Automotive

DS IMU showing system failure
Don't worry, the device is usually showing this error just because the synchronization is not set-up correctly.  If the IMU receives the signal throug...
Wed, 23 May, 2018 at 10:36 AM
DS IMU not sending data
The IMU devices don’t send out data if channels are not set to used and IMU device updated.  Please set the channels to used and click UPDATE IMU DEVICE...
Mon, 28 May, 2018 at 1:27 PM
How to add CAN channels on GPS map
The first step is to change longitude and latitude to minutes. If longitude and latitude are in degrees you need to make a math formula where you multip...
Tue, 18 Dec, 2018 at 3:56 PM
Supported vector cards in Dewesoft for CAN FD
These Vector cards are supported in Dewesoft and can be used for CAN FD: - VN1610 - VN1611 - VN1630 - VN1640 - VN7600 - VN7610 For the VECTOR CAN-...
Tue, 25 Sep, 2018 at 3:12 PM
Why is there no GPS signal
If there is no GPS signal or the signal is poor, these are the things you can try: 1. Try adjusting the GPS antenna The antenna should be always mounted...
Thu, 31 Jan, 2019 at 11:29 AM
No CAN data
Here are the steps you can try if there is no data on CAN ports: 1. Change the CAN operation mode to Read/Write/Acknowledge* *This will not send data o...
Thu, 31 Jan, 2019 at 11:25 AM
Dewesoft doesn't import *.dbc file
For importing the *.dbc file Dewesoft uses Visual C++ Redistributable for Visual Studio 2015.  If this is not installed, it can be downloaded from this lin...
Tue, 11 Dec, 2018 at 2:52 PM
VGPS 200C and VGPSHSC *.dbc files
The *.dbc files are included in Dewesoft installation. they can be found in the "Setups" folder which is automatically generated: ...\DEWESoftX3\...
Tue, 23 Apr, 2019 at 10:01 AM
Loading *.dbc file to all data files in the folder
Here is an example how it is possible to automatically load the *.dbc files in Dewesoft data files using sequencer and Auto Hotkey software.  1. Load al...
Sat, 11 May, 2019 at 1:46 PM
DS-IMU GPS calibration
GPS calibration is also included in the calibration of the unit.  We use a GPS simulator to simulate a virtual drive and compare the data from the device if...
Fri, 26 Jul, 2019 at 11:11 AM